Publicacions en què col·labora amb JOSE MANUEL VASCO OLMO (37)

2023

  1. Cálculo de los parámetros gobernantes de la singularidad en el vértice de grieta en superficies cilíndricas empleando geometría diferencial y correlación digital de imágenes 3D

    Revista española de mecánica de la fractura, Núm. 5, pp. 63-68

  2. Investigation of Plasticity Effects on Growing Fatigue Cracks Using the CJP Model of Crack Tip Fields

    Materials, Vol. 16, Núm. 17, pp. 5744

  3. Mediciones 3D-DIC de alta resolución para análisis de crecimiento de grietas por fatiga

    Revista española de mecánica de la fractura, Núm. 5, pp. 287-292

2022

  1. CCC specimen: A novel specimen for FCG studies under plane strain conditions

    Revista española de mecánica de la fractura, Núm. 3, pp. 21-26

  2. Characterization of non-planar crack tip displacement fields using a differential geometry approach in combination with 3D digital image correlation

    Fatigue and Fracture of Engineering Materials and Structures, Vol. 45, Núm. 5, pp. 1521-1536

  3. Effective stress intensity factor evaluation using thermoelastic stress analysis and digital image correlation

    Revista española de mecánica de la fractura, Núm. 3, pp. 9-14

  4. Evaluation of small-scale yielding boundary using digital image correlation results

    Fatigue and Fracture of Engineering Materials and Structures, Vol. 45, Núm. 4, pp. 1276-1291

  5. Experimental evaluation of plastic wake on growing fatigue cracks from the analysis of residual displacement fields

    Fatigue and Fracture of Engineering Materials and Structures, Vol. 45, Núm. 5, pp. 1494-1504

  6. Experimental evaluation of plastic wake on growing fatigue cracks from the analysis of residual displacement fields

    Revista española de mecánica de la fractura, Núm. 3, pp. 3-8

  7. Influence of Second-Order Effects on Thermoelastic Behaviour in the Proximity of Crack Tips on Titanium

    Experimental Mechanics, Vol. 62, Núm. 3, pp. 521-535

  8. Influence of the fitting approach on the parameters characterising crack tip fields

    Revista española de mecánica de la fractura, Núm. 3, pp. 71-76

  9. Validity of small-scale yielding regime in notched-cracked geometries

    International Journal of Fatigue, Vol. 154

2021

  1. Integración de correlación digital de imágenes y termoelasticidad para el cálculo de los factores de intensidad de tensiones

    Revista iberoamericana de ingeniería mecánica, Vol. 25, Núm. 2, pp. 13-20

  2. Limitations of small-scale yielding for fatigue crack growth

    Engineering Fracture Mechanics, Vol. 252

2020

  1. Experimental evaluation of effective stress intensity factor using thermoelastic stress analysis and digital image correlation

    International Journal of Fatigue, Vol. 135

  2. Numerical tool for the analysis of CTOD curves obtained by DIC or FEM

    Fatigue and Fracture of Engineering Materials and Structures, Vol. 43, Núm. 12, pp. 2984-2997

  3. Plastic CTOD as fatigue crack growth characterising parameter in 2024-T3 and 7050-T6 aluminium alloys using DIC

    Fatigue and Fracture of Engineering Materials and Structures, Vol. 43, Núm. 8, pp. 1719-1730

2019

  1. An improved prediction of the effective range of stress intensity factor in fatigue crack growth

    Structural Integrity (Springer), pp. 133-138

  2. Characterisation of fatigue crack growth using digital image correlation measurements of plastic CTOD

    Theoretical and Applied Fracture Mechanics, Vol. 101, pp. 332-341

  3. Experimental characterisation of fatigue crack growth based on the CTOD measured from crack tip displacement fields using DIC

    Frattura ed Integrita Strutturale, Vol. 13, Núm. 50, pp. 658-666