Proyectos vigentes

  1. Testing methodology for development of electro-mechanical components under temperature solicitation (Anualidad 2028)

    ELIAS LÓPEZ ALBA

  1. Testing methodology for development of electro-mechanical components under temperature solicitation (Anualidad 2027)

    ELIAS LÓPEZ ALBA

  1. Testing methodology for development of electro-mechanical components under temperature solicitation (Anualidad 2026)

    ELIAS LÓPEZ ALBA

  2. Experimental Characterization of Automobile Components usign optical techniques to detect failures in life tests. (ANUALIDAD 2026)

    ELIAS LÓPEZ ALBA

  3. Analysis of mechanical properties and defects on additive manufactured industrial components employing experimental techniques (Anualidad 2026)

    LUIS ANTONIO FELIPE SESE

  4. Experimental evaluation of structural dynamics in industrial components (Anualidad 2026)

    ÁNGEL JESUS MOLINA VIEDMA

  5. Structural Health Management and mechanical behaviour assessment of industrial components employing experimental and optical techniques (Anualidad 2026)

    LUIS ANTONIO FELIPE SESE

  1. Testing methodology for development of electro-mechanical components under temperature solicitation (Anualidad 2025)

    ELIAS LÓPEZ ALBA

  2. Experimental evaluation of structural dynamics in industrial components (Anualidad 2025)

    ÁNGEL JESUS MOLINA VIEDMA

  3. Structural Health Management and mechanical behaviour assessment of industrial components employing experimental and optical techniques (Anualidad 2025)

    LUIS ANTONIO FELIPE SESE

  4. Analysis of mechanical properties and defects on additive manufactured industrial components employing experimental techniques (Anualidad 2025)

    LUIS ANTONIO FELIPE SESE

  5. Experimental Characterization of Automobile Components usign optical techniques to detect failures in life tests. (ANUALIDAD 2025)

    ELIAS LÓPEZ ALBA

  1. Testing methodology for development of electro-mechanical components under temperature solicitation (Anualidad 2024)

    ELIAS LÓPEZ ALBA

  2. Experimental evaluation of structural dynamics in industrial components (Anualidad 2024)

    ÁNGEL JESUS MOLINA VIEDMA

  3. Structural Health Management and mechanical behaviour assessment of industrial components employing experimental and optical techniques (Anualidad 2024)

    LUIS ANTONIO FELIPE SESE

  4. Analysis of mechanical properties and defects on additive manufactured industrial components employing experimental techniques (Anualidad 2024)

    LUIS ANTONIO FELIPE SESE

  5. Development of Experimental Methodology for electro-mechanical analysis in electronic components under dynamics events (ANUALIDAD 2024).

    ELIAS LÓPEZ ALBA

  6. Experimental Characterization of Automobile Components usign optical techniques to detect failures in life tests. (ANUALIDAD 2024)

    ELIAS LÓPEZ ALBA

Proyectos finalizados

2024

  1. Design of an experimental set-up for the analysis of thermo-mechanical industrial applications (Anualidad 2024)

    FRANCISCO ALBERTO DIAZ GARRIDO

  2. Design and validation of testing technologies for the analysis of electro-mechanical components under vibration and extreme temperatures (Anualidad 2024)

    ELIAS LÓPEZ ALBA

  3. Evaluación experimental de la influencia de la temperatura en el comportamiento modal de elementos industriales mediante la integración de campos obtenidos con métodos ópticos

    ELIAS LÓPEZ ALBA

  4. Experimental analysis and modification of mechanical properties of componentes maden by metal additive (ANUALIDAD 2024)

    LUIS ANTONIO FELIPE SESE

  5. Analysis of mechanical behaviour of highly engineered aluminum materials. (ANUALIDAD 2024)

    LUIS ANTONIO FELIPE SESE

2023

  1. Experimental analysis and modification of mechanical properties of componentes maden by metal additive (ANUALIDAD 2023)

    LUIS ANTONIO FELIPE SESE

  2. Analysis of mechanical behaviour of highly engineered aluminum materials (ANUALIDAD 2023)

    LUIS ANTONIO FELIPE SESE

  3. Design of an experimental set-up for the analysis of thermo-mechanical industrial applications (Anualidad 2023)

    FRANCISCO ALBERTO DIAZ GARRIDO

  4. Design and validation of testing technologies for the analysis of electro-mechanical components under vibration and extreme temperatures (Anualidad 2023)

    ELIAS LÓPEZ ALBA

  5. Testing methodology for development of electro-mechanical components under temperature solicitation (Anualidad 2023)

    ELIAS LÓPEZ ALBA

  6. Experimental evaluation of structural dynamics in industrial components (Anualidad 2023)

    ÁNGEL JESUS MOLINA VIEDMA

  7. Structural Health Management and mechanical behaviour assessment of industrial components employing experimental and optical techniques (Anualidad 2023)

    LUIS ANTONIO FELIPE SESE

  8. Analysis of mechanical properties and defects on additive manufactured industrial components employing experimental techniques (Anualidad 2023)

    LUIS ANTONIO FELIPE SESE

  9. Development of Experimental Methodology for electro-mechanical analysis in electronic components under dynamics events (ANUALIDAD 2023).

    ELIAS LÓPEZ ALBA

  10. Experimental Characterization of Automobile Components usign optical techniques to detect failures in life tests. (ANUALIDAD 2023)

    ELIAS LÓPEZ ALBA

  11. Experimental Analysis of Automobile Components under effects of Mechanical Solicitations. (ANUALIDAD 2023)

    ELIAS LÓPEZ ALBA

  12. Evaluación experimental de la influencia de la plasticidad como mecanismo de retardo en el crecimiento de grieta a fatiga empleando métodos ópticos de campo completo (EIPLAS).

    FRANCISCO ALBERTO DIAZ GARRIDO, JOSE MANUEL VASCO OLMO

2022

  1. Experimental analysis and modification of mechanical properties of componentes maden by metal additive (ANUALIDAD 2022)

    LUIS ANTONIO FELIPE SESE

  2. Analysis of mechanical behaviour of highly engineered aluminum materials (ANUALIDAD 2022)

    LUIS ANTONIO FELIPE SESE

  3. Design and validation of testing technologies for the analysis of electro-mechanical components under vibration and extreme temperatures (Anualidad 2022)

    ELIAS LÓPEZ ALBA

  4. Design of an experimental set-up for the analysis of thermo-mechanical industrial applications (Anualidad 2022)

    FRANCISCO ALBERTO DIAZ GARRIDO

  5. Desarrollo de una Metodología Experimental para el análisis termo-modal de elementos industriales multicomponente en condiciones de servicio

    ELIAS LÓPEZ ALBA

  6. Testing methodology for development of electro-mechanical components under temperature solicitation (Anualidad 2022)

    ELIAS LÓPEZ ALBA

  7. Experimental evaluation of structural dynamics in industrial components (Anualidad 2022)

    ÁNGEL JESUS MOLINA VIEDMA

  8. Structural Health Management and mechanical behaviour assessment of industrial components employing experimental and optical techniques (Anualidad 2022)

    LUIS ANTONIO FELIPE SESE

  9. Analysis of mechanical properties and defects on additive manufactured industrial components employing experimental techniques (Anualidad 2022)

    LUIS ANTONIO FELIPE SESE

  10. Development of Experimental Methodology for electro-mechanical analysis in electronic components under dynamics events. (2ª MITAD ANUALIDAD 2022)

    ELIAS LÓPEZ ALBA

  11. Experimental Characterization of Automobile Components usign optical techniques to detect failures in life tests (2ª MITAD ANUALIDAD 2022)

    ELIAS LÓPEZ ALBA

  12. Experimental Analysis of Automobile Components under effects of Mechanical Solicitations. (ANUALIDAD 2022)

    ELIAS LÓPEZ ALBA

  13. Implementación de técnicas ópticas de medida de deformaciones para el análisis modal en aplicaciones industriales. (IMODE)

    LUIS ANTONIO FELIPE SESE, ELIAS LÓPEZ ALBA

  14. Development of Experimental Methodology for electro-mechanical analysis in electronic components under dynamics events (1ª MITAD DE ANUALIDAD 2022).

    ELIAS LÓPEZ ALBA

  15. Experimental Characterization of Automobile Components usign optical techniques to detect failures in life tests. (1ª MITAD ANUALIDAD 2022)

    ELIAS LÓPEZ ALBA

  16. Torque analysis on threaded elements II

    LUIS ANTONIO FELIPE SESE

  17. Torque analysis on threaded elements

    LUIS ANTONIO FELIPE SESE

  18. Testing methodology for development of electro-mechanical components under temperature solicitation (Anualidad 2021_FIRMA)

    ELIAS LÓPEZ ALBA

2021

  1. Analysis of mechanical behaviour of highly engineered aluminum materials. (ANUALIDAD 2021)

    LUIS ANTONIO FELIPE SESE

  2. Design and validation of testing technologies for the analysis of electro-mechanical components under vibration and extreme temperatures (Anualidad 2021)

    ELIAS LÓPEZ ALBA

  3. Design of an experimental set-up for the analysis of thermo-mechanical industrial applications (Anualidad 2021)

    FRANCISCO ALBERTO DIAZ GARRIDO

  4. Development of Experimental Methodology for electro-mechanical analysis in electronic components under dynamics events (ANUALIDAD 2021).

    ELIAS LÓPEZ ALBA

  5. Experimental Characterization of Automobile Components usign optical techniques to detect failures in life tests. (ANUALIDAD 2021)

    ELIAS LÓPEZ ALBA

  6. Experimental Analysis of Automobile Components under effects of Mechanical Solicitations. (ANUALIDAD 2021)

    ELIAS LÓPEZ ALBA

  7. Analysis of composition of parts of automotive components

    LUIS ANTONIO FELIPE SESE

  8. Analysis of behaviour and defects on polymer component loaded under quasi-static and dynamic loads

    LUIS ANTONIO FELIPE SESE

  9. High-performance experimental study in an industrial multicomponent element based on modal analysis at low frequencies II

    ELIAS LÓPEZ ALBA

  10. Analysis of composition and mechanical behavior of parts of automative warning devices.

    LUIS ANTONIO FELIPE SESE

2020

  1. High-performance experimental study in an industrial multicomponent element based on modal analysis at low frequencies

    ELIAS LÓPEZ ALBA

  2. Development of Experimental Methodology for electro-mechanical analysis in electronic components under dynamics events (ANUALIDAD 2020).

    ELIAS LÓPEZ ALBA

  3. Avances en Simulación y Modelado Geométrico de Fracturas Óseas usando Patrones de Fractura Basados en Experimentación Mecánica.

    JUAN JOSÉ JIMÉNEZ DELGADO

  4. Experimental Characterization of Automobile Components usign optical techniques to detect failures in life tests. (ANUALIDAD 2020)

    ELIAS LÓPEZ ALBA

  5. Experimental Analysis of Automobile Components under effects of Mechanical Solicitations. (ANUALIDAD 2020)

    ELIAS LÓPEZ ALBA

  6. Evaluación Numérico-Experimental de la Influencia del Retardo Inducido por Plasticidad en la Integridad Estructural de Componentes Mecánicos Sometidos a Fatiga

    FRANCISCO ALBERTO DIAZ GARRIDO, JOSE MANUEL VASCO OLMO

  7. Analysis of tensile strength of FDM material specimens

    LUIS ANTONIO FELIPE SESE

  8. Analysis of Mechanical Properties of FDM material by employing optical techniques

    LUIS ANTONIO FELIPE SESE

  9. Determination of mechanical properties of samples of FDM material

    LUIS ANTONIO FELIPE SESE

  10. Determination of the bending properties of samples of FDM material

    LUIS ANTONIO FELIPE SESE

  11. Experimental Analysis of Automobile Components under effects of Mechanical Solicitations. (ANUALIDAD 2019_FIRMA)

    ELIAS LÓPEZ ALBA

  12. Thermo mechanical analysis of electronics components (ANUALIDAD 2020)

    ELIAS LÓPEZ ALBA

  13. Vibration analysis in CABLE CHANNELS & BRACKETS IN PLASTIC

    FRANCISCO ALBERTO DIAZ GARRIDO

  14. Experimental Characterization of Automobile Components usign optical techniques to detect failures in life tests (ANUALIDAD 2019_FIRMA)

    ELIAS LÓPEZ ALBA

2019

  1. Thermo mechanical analysis of electronics components (ANUALIDAD 2019)

    ELIAS LÓPEZ ALBA

  2. Industrial Application of fringe projection profilometry for shape measurement

    LUIS ANTONIO FELIPE SESE

  3. Determination of the tensile strength properties of samples of FDM material

    LUIS ANTONIO FELIPE SESE

2018

  1. Thermo mechanical analysis of electronics components (ANUALIDAD 2018)

    ELIAS LÓPEZ ALBA

  2. High speed visualization and study of components of warning devices

    LUIS ANTONIO FELIPE SESE

  3. Rapid Prototyping Optimization for Mechanical behavior improvement of components

    ELIAS LÓPEZ ALBA

  4. Mechanical caracterization of automobile components under low-high temperatures using Digital Image Correlation

    ELIAS LÓPEZ ALBA

2017

  1. Mejora de procedimiento de integración de las técnicas proyección de franjas y correlación de imágenes 2D para la medida de deformaciones 3D en elementos mecánicos

    LUIS ANTONIO FELIPE SESE

  2. Thermo mechanical analysis of electronics components (ANUALIDAD 2017)

    ELIAS LÓPEZ ALBA

  3. Caracterización mecánica mediante la realización de ensayos a tracción de probetas fabricadas con material de alta resistencia

    JOSE MANUEL VASCO OLMO

  4. Caracterización mecánica de probetas fabricadas de material compuesto mediante la realización de ensayos a tracción

    JOSE MANUEL VASCO OLMO

  5. Measurement of micro-texture shape on plastic specimens

    LUIS ANTONIO FELIPE SESE

  6. Frequencies analysis of membranes of acoustic warnings

    LUIS ANTONIO FELIPE SESE

  7. Flow measurement on acustic warnings

    LUIS ANTONIO FELIPE SESE

  8. Viability analisys of stir welding process on PP and PC plastic materials

    ELIAS LÓPEZ ALBA

  9. Caracterización mecánica de materiales compuestos mediante la realización de ensayos a tracción

    JOSE MANUEL VASCO OLMO

2016

  1. 3D- Displacement Measurement on acoustic warning devices during operation

    LUIS ANTONIO FELIPE SESE

  2. Alas de turbopropulsor mediante optimización logística y desarrollo online.(APOLO): Proyecto Feder Innterconecta 2015

    FRANCISCO ALBERTO DIAZ GARRIDO

  3. Estudio mecánico para el recubrimiento de componentes en utillajes de soldadura láser

    JOSE MANUEL VASCO OLMO

  4. Testing technologies based on interferometry

    FRANCISCO ALBERTO DIAZ GARRIDO

  5. Numerical - Experimental study of headlamps and rearlamps

    ELIAS LÓPEZ ALBA

2015

  1. Impact analysis of prototipe headlamps using 3D-DIC

    ELIAS LÓPEZ ALBA

  2. Mechanical asembly study of headlamps using DIC-3D

    ELIAS LÓPEZ ALBA

  3. Estudio del comportamiento termomecánico en un proyector de automóvil empleando video correlación

    LUIS ANTONIO FELIPE SESE

  4. Experimental Analysis of Residual Stress using Photoelasticity of a Nissan F91 Headlamps

    JOSE MANUEL VASCO OLMO

  5. Evaluación del uso de métodos ópticos para el análisis experimental de vibraciones en elementos mecánicos para lighting

    ELIAS LÓPEZ ALBA

2014

  1. Análisis de desplazamiento y deformaciones en estructuras multifuncionales sometidas a impacto empleando la técnica DIC 3D HS (Digital Image Correlation 3D High Speed)

    FRANCISCO ALBERTO DIAZ GARRIDO

  2. Mechanical Asembly Study of Headlamps using DIC-3D

    ELIAS LÓPEZ ALBA

  3. Diseño y validación experimental de trayectorias suaves para cajeado

    RUBÉN DORADO VICENTE

2013

  1. Mechanical Asembly Study of Headlamps using DIC-3C and SPF

    ELIAS LÓPEZ ALBA

  2. Experimental Analysis of Residual Stress using Photoelasticity of a Ford C520E Rearlamp

    ELIAS LÓPEZ ALBA

  3. Mechanical Assembly Study of Headlamps using DIC and SPF technology

    ELIAS LÓPEZ ALBA

2012

  1. Desarrollo de control mecánico y electrónico de proyectores prototipo mediante control wifi

    ELIAS LÓPEZ ALBA

  2. Detección y caracterización de impactos y daños mediante DIC (Digital Image Correlation) correspondiente al proyecto DEPLA ( Desarrollo de Protecciones Ligeras para Avion)

    FRANCISCO ALBERTO DIAZ GARRIDO

  3. Estudio mecánico en proyectores para su uso en el sector de la automoción

    ELIAS LÓPEZ ALBA

  4. Estudio de mejora de la calidad en proyectores prototipo del proyecto SEAT-SE 370 HL FULL LED

    ELIAS LÓPEZ ALBA

  5. Desarrollo de proyectores para automóviles con tecnología LEDS

    ELIAS LÓPEZ ALBA

  6. Desarrollo de prototipos mediante la aplicación de la tecnología SPF (Sala limpia)

    ELIAS LÓPEZ ALBA

  7. Desarrollo de proyectores para automóviles con tecnología LEDS

    ELIAS LÓPEZ ALBA

  8. Desarrollo de prototipos mediante la aplicación tecnológica SPF

    ELIAS LÓPEZ ALBA

  9. Desarrollo de proyectores para automóviles con tecnología LEDS

    ELIAS LÓPEZ ALBA

2011

  1. Desarrollo de Prototipos mediante la aplicación tecnológica SPF

    ELIAS LÓPEZ ALBA

  2. Desarrollo de prototipos mediante la aplicación tecnológica de SPF

    ELIAS LÓPEZ ALBA

2010

  1. Actividades de detección y caracterización de impactos y daños mediante DIC (Digital Image Correlation) correspondiente al proyecto DEPLA (Desarrollo de protecciones ligeras para avión)

    FRANCISCO ALBERTO DIAZ GARRIDO