Publications (31)

2022

  1. Alkaline activation of high-crystalline low-Al2O3 Construction and Demolition Wastes to obtain geopolymers

    Journal of Cleaner Production, Vol. 330

2021

  1. Aluminum titanate, structure and properties

    Encyclopedia of Materials: Technical Ceramics and Glasses (Elsevier), pp. 76-92

  2. Effect of Al2 TiO5 content and sintering temperature on the microstructure and residual stress of Al2 O3 –Al2 TiO5 ceramic composites

    Materials, Vol. 14, Núm. 24

  3. Formulating low cost modified bentonite with natural binders to remove pesticides in a pilot water filter system

    Journal of Environmental Chemical Engineering, Vol. 9, Núm. 1

2019

  1. Optimizing a low added value bentonite as adsorbent material to remove pesticides from water

    Science of the Total Environment, Vol. 672, pp. 743-751

  2. Ternary diagrams as a tool for developing ceramic materials from waste: relationship between technological properties and microstructure

    Environmental Science and Pollution Research, Vol. 26, Núm. 35, pp. 35574-35587

2018

  1. Inorganic polymers synthesized using biomass ashes-red mud as precursors based on clay-kaolinite system

    Materials Letters, Vol. 225, pp. 161-166

2017

  1. Energy, environmental and technical assessment for the incorporation of EAF stainless steel slag in ceramic building materials

    Journal of Cleaner Production, Vol. 142, pp. 1778-1788

  2. Evaluation of spent diatomite incorporation in clay based materials for lightweight bricks processing

    Construction and Building Materials, Vol. 144, pp. 327-337

2016

  1. Influence of waste addition on the porosity of clay-based ceramic membranes

    Desalination and Water Treatment, Vol. 57, Núm. 6, pp. 2633-2639

  2. Lighter structural clay ceramics manufactured with marble cutting dust and paperboard based packaging waste

    Key Engineering Materials

  3. Preface

    Key Engineering Materials

  4. Production of ceramic materials using only waste as raw materials

    Key Engineering Materials

2014

  1. Residual strain scanning of alumina-based ceramic composites by neutron diffraction

    Journal of Physics: Conference Series

2011

  1. Improved wear behaviour of alumina-aluminium titanate laminates with low residual stresses and large grained interfaces

    Journal of the European Ceramic Society, Vol. 31, Núm. 4, pp. 475-483

2010

  1. Processing of alumina-coated tetragonal zirconia materials and their response to sliding wear

    Ceramics International, Vol. 36, Núm. 5, pp. 1545-1552

2009

  1. Design and processing of a ceramic laminate with high toughness and strong interfaces

    Composites Part A: Applied Science and Manufacturing, Vol. 40, Núm. 2, pp. 137-143

2008

  1. Fracture behaviour of microcrack-free alumina-aluminium titanate ceramics with second phase nanoparticles at alumina grain boundaries

    Journal of the European Ceramic Society, Vol. 28, Núm. 10, pp. 1961-1971

  2. Non-destructive characterisation of alumina/aluminium titanate composites using a micromechanical model and ultrasonic determinations. Part I. Evaluation of the effective elastic constants of aluminium titanate

    Ceramics International, Vol. 34, Núm. 1, pp. 181-188

  3. Non-destructive characterisation of alumina/aluminium titanate composites using a micromechanical model and ultrasonic determinations. Part II. Evaluation of microcracking

    Ceramics International, Vol. 34, Núm. 1, pp. 189-195