Publications in collaboration with researchers from Instituto de Cerámica y Vidrio (19)

2021

  1. Aluminum titanate, structure and properties

    Encyclopedia of Materials: Technical Ceramics and Glasses (Elsevier), pp. 76-92

  2. Effect of Al2 TiO5 content and sintering temperature on the microstructure and residual stress of Al2 O3 –Al2 TiO5 ceramic composites

    Materials, Vol. 14, Núm. 24

2014

  1. Residual strain scanning of alumina-based ceramic composites by neutron diffraction

    Journal of Physics: Conference Series

2011

  1. Improved wear behaviour of alumina-aluminium titanate laminates with low residual stresses and large grained interfaces

    Journal of the European Ceramic Society, Vol. 31, Núm. 4, pp. 475-483

2010

  1. Processing of alumina-coated tetragonal zirconia materials and their response to sliding wear

    Ceramics International, Vol. 36, Núm. 5, pp. 1545-1552

2009

  1. Design and processing of a ceramic laminate with high toughness and strong interfaces

    Composites Part A: Applied Science and Manufacturing, Vol. 40, Núm. 2, pp. 137-143

2008

  1. Fracture behaviour of microcrack-free alumina-aluminium titanate ceramics with second phase nanoparticles at alumina grain boundaries

    Journal of the European Ceramic Society, Vol. 28, Núm. 10, pp. 1961-1971

  2. Non-destructive characterisation of alumina/aluminium titanate composites using a micromechanical model and ultrasonic determinations. Part I. Evaluation of the effective elastic constants of aluminium titanate

    Ceramics International, Vol. 34, Núm. 1, pp. 181-188

  3. Non-destructive characterisation of alumina/aluminium titanate composites using a micromechanical model and ultrasonic determinations. Part II. Evaluation of microcracking

    Ceramics International, Vol. 34, Núm. 1, pp. 189-195

  4. Reduced strength degradation of alumina-aluminium titanate composite subjected to low-velocity impact loading

    Journal of the European Ceramic Society, Vol. 28, Núm. 15, pp. 2923-2931

2007

  1. Flaw tolerant ceramic laminates with negligible residual stresses between layers

    Key Engineering Materials

  2. Layered materials with high strength and flaw tolerance based on alumina and aluminium titanate

    Journal of the European Ceramic Society, Vol. 27, Núm. 2-3, pp. 1455-1462

2006

  1. In situ developed laminates with large microstructural differences between layers of similar composition

    Journal of Materials Science, Vol. 41, Núm. 12, pp. 3695-3700

  2. Instrumented Vickers microindentation of alumina-based materials

    Journal of Materials Research, Vol. 21, Núm. 1, pp. 161-173

  3. Piezo-spectroscopic characterization of alumina-aluminium titanate laminates

    Journal of the European Ceramic Society, Vol. 26, Núm. 13, pp. 2699-2705

2005

  1. Design and processing of Al2O3-Al2TiO5 layered structures

    Journal of the European Ceramic Society, Vol. 25, Núm. 6, pp. 847-856

  2. Fracture mechanisms in laminates in the alumina - Titania system

    Key Engineering Materials

2004

  1. Colloidal processing of laminates in the system alumina - Titania

    Key Engineering Materials

  2. Reaction sintered Al2O3/Al2 TiO5 microcrack-free composites obtained by colloidal filtration

    Journal of the European Ceramic Society, Vol. 24, Núm. 9, pp. 2785-2791