![Foto de FRANCISCO JAVIER](/img/nophoto.png)
FRANCISCO JAVIER
IGLESIAS GODINO
TITULAR DE UNIVERSIDAD
Publications (27) FRANCISCO JAVIER IGLESIAS GODINO publications
2023
2022
-
MANAGING THE PROCEDURES OF A HIGHER EDUCATION INSTITUTION USING GOOGLE WORKSPACE
ICERI2022 Proceedings
2021
-
Development of cold in-place recycling with bitumen emulsion and biomass bottom ash
Crystals, Vol. 11, Núm. 4
-
Development of geopolymers as substitutes for traditional ceramics for bricks with chamotte and biomass bottom ash
Materials, Vol. 14, Núm. 1, pp. 1-20
-
Development of high resistance hot mix asphalt with electric arc furnace slag, ladle furnace slag, and cellulose fibers from the papermaking industry
Applied Sciences (Switzerland), Vol. 11, Núm. 1, pp. 1-23
-
Evaluation of physical, chemical, and environmental properties of biomass bottom ash for use as a filler in bituminous mixtures
Sustainability (Switzerland), Vol. 13, Núm. 8
-
Evaluation of the physical, chemical and environmental properties of ladle furnace slag for their utilization as filler in bituminous mixtures
Metals, Vol. 11, Núm. 3, pp. 1-15
-
Study of the incorporation of biomass bottom ash as a filler for discontinuous grading bituminous mixtures with bitumen emulsion
Applied Sciences (Switzerland), Vol. 11, Núm. 8
2020
-
Development of porous asphalt with bitumen emulsion, electric arc furnace slag and cellulose fibers for medium traffic roads
Minerals, Vol. 10, Núm. 10, pp. 1-21
-
Development of slurry surfacing with electric arc furnace slag for pavements with friction problems
Minerals, Vol. 10, Núm. 10, pp. 1-19
-
Evaluation of the use of electric arc furnace slag and ladle furnace slag in stone mastic asphalt mixes with discarded cellulose fibers from the papermaking industry
Metals, Vol. 10, Núm. 11, pp. 1-23
-
Retention of contaminants elements from tailings from lead mine washing plants in ceramics for bricks
Minerals, Vol. 10, Núm. 6, pp. 1-21
-
Study of the incorporation of biomass bottom ashes in ceramic materials for the manufacture of bricks and evaluation of their leachates
Materials, Vol. 13, Núm. 9
-
Study of the incorporation of ladle furnace slag in the manufacture of cold in-place recycling with bitumen emulsion
Materials, Vol. 13, Núm. 21, pp. 1-20
-
Surface treatments with dichloromethane to eliminate printing lines on polycarbonate components printed by fused deposition modelling technology
Materials, Vol. 13, Núm. 12
2017
-
Corrosion and fracture analysis in screws of dental implants prostheses. New coatings
Engineering Failure Analysis, Vol. 82, pp. 657-665
2016
-
Study of the wet pomace as an additive in ceramic material
Desalination and Water Treatment, Vol. 57, Núm. 6, pp. 2712-2718
-
Study of waste from two-phase olive oil extraction as an additive in ceramic material
Key Engineering Materials
2014
-
Porosity of expanded clay manufactured with addition of sludge from the brewing industry
International Journal of Energy and Environmental Engineering, Vol. 5, Núm. 4, pp. 341-347
-
Replacement of the mixing fresh water by wastewater olive oil extraction in the extrusion of ceramic bricks
Construction and Building Materials, Vol. 68, pp. 659-666