FRANCISCO ANTONIO
CORPAS IGLESIAS
CATEDRATICO DE UNIVERSIDAD
FRANCISCO JAVIER
IGLESIAS GODINO
TITULAR DE UNIVERSIDAD
Publications by the researcher in collaboration with FRANCISCO JAVIER IGLESIAS GODINO (14)
2021
-
Development of cold in-place recycling with bitumen emulsion and biomass bottom ash
Crystals, Vol. 11, Núm. 4
-
Development of geopolymers as substitutes for traditional ceramics for bricks with chamotte and biomass bottom ash
Materials, Vol. 14, Núm. 1, pp. 1-20
-
Development of high resistance hot mix asphalt with electric arc furnace slag, ladle furnace slag, and cellulose fibers from the papermaking industry
Applied Sciences (Switzerland), Vol. 11, Núm. 1, pp. 1-23
-
Evaluation of physical, chemical, and environmental properties of biomass bottom ash for use as a filler in bituminous mixtures
Sustainability (Switzerland), Vol. 13, Núm. 8
-
Evaluation of the physical, chemical and environmental properties of ladle furnace slag for their utilization as filler in bituminous mixtures
Metals, Vol. 11, Núm. 3, pp. 1-15
-
Study of the incorporation of biomass bottom ash as a filler for discontinuous grading bituminous mixtures with bitumen emulsion
Applied Sciences (Switzerland), Vol. 11, Núm. 8
2020
-
Development of porous asphalt with bitumen emulsion, electric arc furnace slag and cellulose fibers for medium traffic roads
Minerals, Vol. 10, Núm. 10, pp. 1-21
-
Development of slurry surfacing with electric arc furnace slag for pavements with friction problems
Minerals, Vol. 10, Núm. 10, pp. 1-19
-
Evaluation of the use of electric arc furnace slag and ladle furnace slag in stone mastic asphalt mixes with discarded cellulose fibers from the papermaking industry
Metals, Vol. 10, Núm. 11, pp. 1-23
-
Retention of contaminants elements from tailings from lead mine washing plants in ceramics for bricks
Minerals, Vol. 10, Núm. 6, pp. 1-21
-
Study of the incorporation of biomass bottom ashes in ceramic materials for the manufacture of bricks and evaluation of their leachates
Materials, Vol. 13, Núm. 9
-
Study of the incorporation of ladle furnace slag in the manufacture of cold in-place recycling with bitumen emulsion
Materials, Vol. 13, Núm. 21, pp. 1-20
-
Surface treatments with dichloromethane to eliminate printing lines on polycarbonate components printed by fused deposition modelling technology
Materials, Vol. 13, Núm. 12
2017
-
Corrosion and fracture analysis in screws of dental implants prostheses. New coatings
Engineering Failure Analysis, Vol. 82, pp. 657-665