Estudio de los métodos analíticos para la extracción de parámetros eléctricos de módulos fotovoltaicos de capas delgadasColaboración con el XXIII Simposio Peruano de Energía Solar

  1. Perich Ibañez, Renzo Alberto 1
  2. Sevillano Bendezú, Miguel Ángel
  3. Montes Romero, Jesús 2
  4. Conde Mendoza, Luis Ángel 1
  5. Angulo Abanto, José Rubén 1
  6. De la Casa Higueras, Juan 2
  7. Palomino Töfflinger, Jan Amaru 1
  1. 1 Departamento de Ciencias, Sección Física, Pontificia Universidad Católica del Perú, Lima, Perú.
  2. 2 Grupo IDEA, Departamento de Ingeniería Electrónica y Automatización, Universidad de Jaén, Jaén, España.
Revista:
TECNIA

ISSN: 2309-0413,  0375-7765

Any de publicació: 2020

Volum: 30

Número: 1

Pàgines: 53-58

Tipus: Article

DOI: 10.21754/TECNIA.V30I1.851 DIALNET GOOGLE SCHOLAR lock_openAccés obert editor

Altres publicacions en: TECNIA

Resum

In order to find a module’s real efficiency and predict its power and energy production it is necessary to study its behaviour and characterize it in the conditions in which it is installed. The single diode model for photovoltaic (PV) cells relates a cell’s current to its voltage through five electric parameters which give us fundamental information about a module and the physical processes inside its cells. Currently, there are many analytical, numerical and heuristic methods used to extract the model’s parameters, each one with advantages and disadvantages that depend on the technology of the module and climate conditions. Current analytical methods used to extract parameters from silicon modules were applied to thin film PV modules in order to study their validity. This work presents the results of the parameter extraction by comparing the measured current-voltage (IV) curve with the modelled curve, as well as through Normalized Root Mean Square Error (NRMSE) calculations with the objective of comparing and evaluating the selected analytical methods.

Referències bibliogràfiques

  • [1] G. Ciulla, V. Lo Brano, V. Di Dio and G. Cipriani. “A comparison of different one-diode models for the representation of I–V characteristic of a PV cell”, Renewable and Sustainable Energy Reviews, vol.32, pp. 684–696, 2014.
  • [2] M. Kumar and A. Kumar, “Performance assessment and degradation analysis of solar photovoltaic technologies: A review”, Renewable and Sustainable Energy Reviews, vol. 78, pp. 554–587, 2017.
  • [3] F. Ghani, G. Rosengarten, M. Duke and J. K. Carson, “The numerical calculation of single-diode solar-cell modelling parameters", Renewable Energy, vol. 72, pp. 105–112, 2014.
  • [4] A. R. Jordehi, “Parameter estimation of solar photovoltaic (PV) cells: A review”, Renewable and Sustainable Energy Reviews, vol.61, pp. 354–371, 2016.
  • [5] F. Khan, S.-H. Baek, Y. Park and J. H. Kim, “Extraction of diode parameters of silicon solar cells under high illumination conditions”, Energy Conversion and Management, vol. 76, pp. 421–429. 2013.
  • [6] J. C. H. Phang, D. S. H. Chan and J. R. Phillips, “Accurate analytical method for the extraction of solar cell model parameters”, Electronics Letters, vol. 20, no. 10, pp. 406-408, 1984.
  • [7] J. Montes-Romero, F. Almonacid, M. Theristis, J. de la Casa, G. E. Georghiou, and E. F. Fernández, “Comparative analysis of parameter extraction techniques for the electrical characterization of multi-junction CPV and m-Si technologies”, Solar Energy, vol.160, pp. 275–288, 2018.
  • [8] E. F. Fernández, J. Montes-Romero, J. de la Casa, P- Rodrigo F. and Almonacid, “Comparative study of methods for the extraction of concentrator photovoltaic module parameters”, Solar Energy, vol. 137, pp. 413–423, 2016.
Fuente de los datos: Dialnet