INGENIERÍA MECÁNICA Y MINERA

2019

1. A comparative study of performance and regulated emissions in a medium-duty diesel engine fueled with sugarcane diesel-farnesane and sugarcane biodiesel-LS9

   Energy, pp. 392-409

2. A material model to reproduce mixed-mode fracture in concrete

   Fatigue and Fracture of Engineering Materials and Structures, Vol. 42, Núm. 1, pp. 223-238

3. Alternative calibration of cup anemometers: A way to reduce the uncertainty of wind power density estimation

   Sensors (Switzerland), Vol. 19, Núm. 9

4. An alternative procedure to measure railroad track irregularities. Application to a scaled track

   Measurement: Journal of the International Measurement Confederation, Vol. 137, pp. 417-427

5. Build time estimation for fused filament fabrication via average printing speed

   Materials, Vol. 12, Núm. 23

6. Characterisation of fatigue crack growth using digital image correlation measurements of plastic CTOD

   Theoretical and Applied Fracture Mechanics, Vol. 101, pp. 332-341

7. Comportamiento a fractura de mezclas de yeso con adición de fibras poliméricas

   Anales de mecánica de la fractura, Núm. 36, pp. 114-119

8. Detection and classification of internal defects in limestone blocks based on a deconvolution technique with SI-PLCA applied to GPR signals

   Research in Nondestructive Evaluation, Vol. 30, Núm. 6, pp. 350-379

9. Dispersion of metal(loid)s in fluvial sediments: an example from the Linares mining district (southern Spain)

   International Journal of Environmental Science and Technology, Vol. 16, Núm. 1, pp. 469-484

10. Effect of diameter ratio on the flow-induced vibrations of two rigidly coupled circular cylinders in tandem

    Journal of Fluids and Structures, Vol. 89, pp. 96-107

11. Energy capacity and seismic performance of RC waffle-flat plate structures under two components of far-field ground motions: Shake table tests

    Earthquake Engineering and Structural Dynamics, Vol. 48, Núm. 8, pp. 949-969

12. Enhancing Productivity by Means of High Feed Rate in the Drilling of Al 2011 Aluminium Alloy

    Arabian Journal for Science and Engineering, Vol. 44, Núm. 9, pp. 8035-8042

13. Environmental criteria for assessing the competitiveness of public tenders with the replacement of large-scale LEDs in the outdoor lighting of cities as a key element for sustainable development: Case study applied with PROMETHEE methodology

    Sustainability (Switzerland), Vol. 11, Núm. 21

14. Evaluación del efecto de diferentes sobrecargas en el crecimiento de grieta a fatiga empleando las técnicas ópticas de fotoelasticidad y DIC

    Anales de mecánica de la fractura, Núm. 36, pp. 515-520

15. Experimental characterisation of fatigue crack growth based on the CTOD measured from crack tip displacement fields using DIC

    Frattura ed Integrita Strutturale, Vol. 13, Núm. 50, pp. 658-666

16. Experimental study of mode shifting in an asymmetrically heated rectangular plate

    Journal of Sound and Vibration, Vol. 439, pp. 241-250

17. FP+DIC for low-cost 3D full-field experimental modal analysis in industrial components

    Mechanical Systems and Signal Processing, Vol. 128, pp. 329-339

18. Facing the challenges of the food industry: Might additive manufacturing be the answer?

    Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 233, Núm. 8, pp. 1902-1906

19. Geophysical prospecting using ERT and IP techniques to locate Galena veins

    Remote Sensing, Vol. 11, Núm. 24

20. Influence of ambient conditions on wind speed measurement: Impact on the annual energy production assessment

    Energy Conversion and Management, Vol. 195, pp. 1111-1123